RMR Optic Plate – H Series

$170.00

*Will be available here as soon as we receive more back from anodize*

Our RMR Optic Plate for H-Series firearms features the co-witness iron sight in front of the optic to minimize distractions. This RMR Plate will NOT accept an SRO. We do make a plate specifically for the SRO that will work. 

✓ 7075 Aerospace Grade Aluminum 

✓ Co-Witness Iron Sight

✓ Type III Hard Anodized Black

✓ CNC Precision Machined to the Highest Standards

✓ Proudly Made in the USA

Please follow the installation instructions included with the plate. They are also in the Tech Info tab below. Over tightening the screws will cause the plate to break. 

Out of stock

Additional information

Weight

.4oz

Dimensions

2.175" L X 1.10" W X 525" H

Coating

Type III Hard Anodize – Black

Installation Instructions

Screws that attach the Plate to the Slide, we recommend getting them finger tight then going 1/8 turn past or 20 in/Ibs. 4-40 Screws that attach the Optic to the Plate, we recommend tightening them to 7 in/Ibs and applying blue loctite (on these screws only). Do not over tighten the screws or the plate will break.

Due to varying dimensions of optics and screw heads, to ensure proper fit so that the screws do not bottom out on the slide and damage the optic plate, please check the following:

1. Before installing optic plate to slide. 2.Put the optic on the plate. 3.Install the screws. 4.Make sure the screws do not stick out past the bottom of the plate.

If they do:

1.Mark the screws at the bottom of the plate. 2.Remove the screws from the optic plate. 3.Trim the screws a little above the mark. 4. Reinstall the screws. 5. Make sure the screws do not protrude past the bottom of the optic plate. 6. Reinstall optic plate on the slide.

**Some mechanical inch/pound wrenches can kick back and cause the screws to loosen over time. You should check the screws periodically to ensure they are not coming loose.

Policies

Shipping

All website orders will ship within 3 business days unless an unexpected delay occurs. In which case, you will be contacted by phone or email. Please ensure both are correct during checkout. 

Our No Hassle Warranty

Phoenix Trinity Firearms is committed to providing you with the highest quality firearms and parts on the market. We 100% stand behind all of our products that have not been altered and have been properly maintained and cared for. 

Refund Policy

All sales are final and no refunds will be provided. But DON’T WORRY! We back all of our products 100%. We will always warranty any defective product.

Exports

We currently ship domestically only. International orders can be shipped to a U.S. Based Exporter. Contact Us for Ordering and Information.

Exports of licensed products are regulated by various US Government agencies. The International Traffic in Arms Regulations (ITAR) is administered by The Directorate of Defense Trade Controls (DDTC) through the US Department of State.

Disclaimer

We produce components for firearms. Firearms can be lethal if not properly used and/or maintained. The assembly or installation of firearm parts and components should only be performed by those who are familiar with the components of a firearm and the proper installation of our products. Improper use, misuse, untrained use, improper installation and untrained installation may result in damage to property, personal injury or death. Only install component parts on the specific make and model of the firearm for which they are designed and specified. If you are not properly trained in the installation of these parts, have them installed by a gunsmith or armorer.

By purchasing our product, it is your responsibility to ensure that you take all necessary precautions and follow responsible safety behaviors when assembling, installing, using and maintaining a firearm and all firearm components. 

RESPONSIBLE SAFETY BEHAVIOR: Firearms are dangerous and can cause serious injury or death if they are misused or used inappropriately. Safety must be the prime consideration for anyone who owns or handles firearms. Safe use of our product in a firearm is your personal responsibility and the failure to follow responsible safety behavior may result in severe personal injury or death to you or others. We will not be responsible for any personal injury, death or property damage that results from the criminal or negligent use of our product; a disregard of the instructions and warnings provided, improper or careless handling of our product (including any firearm with our product installed), the use of non-standard, defective or improper ammunition or improper or negligent modifications or repairs to our product and any firearm with our product installed.